地下结构模型试验的光学激波管

光学激波管是进行抗爆结构试验研究的一种新型动载设备,它除具有常规激波管的通过电测手段测试试验结构物上一点或多点的应力、应变、速度等力学参数外,其突出的特点是通过光测手段能够拍摄试验结构物在冲击波动压作用下连续变化的过程和被破坏形态的清晰物理图像,进行地下结构的抗爆研究。本文较详细地介绍了用于地下结构抗爆试验研究用的光学激波管设备的构造和测试手段以及设备调试和应用试验的情况,最后还公布了用该设备拍摄到的激波进入通道后波后新物理现象的彩色波动照片及用该设备做的部分试验研究成果。     

1994年2月21日行星际激波引起的磁暴

利用Imp-8,Geotail和Goes-6等卫星资料,研究了1994年2月21日0900UT到达地球磁层的行星际激波引起的磁暴期间,从太阳风向磁层传输能量的有关问题.结果指出:（1）南向行星际磁场（IMF）的长持续时间不是太阳风向磁层输能的必要条件.南北振荡的,较强IMF也能产生显著的能量传输;（2）行星际扰动磁场通过弓激波和磁层顶后扰动磁能增加,增幅将近5倍;（3）在磁层内扰动磁场的Bz分量在1×10-4Hz附近显著被吸收.这一低频扰动磁场可能是磁暴期间导致氧离子和质子等环电流粒子向内扩散并被加速的原因之一.     

行星际空间MHD模拟激波跃变关系分析

分析了模拟得到的可以传播到1AU以远的日地空间磁流体力学激波与Rankine-Hugnoniot跃变关系的符合程度．通过对模拟激波的结构及其在传播过程中的演化进行的分析，提出了模拟激波的定位方法；基于所提出的定位方法，利用向长青提出的确定MHD激波局地参数的方法计算了模拟得到的激波与Rankine-Hugnoniot跃变关系的偏差．结果表明在激波传播到100Rs以后，激波对中前向快激波与Rankine-Hugnoniot关系的符合达到很高的程度，相对误差在10^-2数量级以内；并且在激波传播到150 Rs以后，相对误差在10^-3数量级以内．这个结果说明文中所使用的有限差分数值格式能较好地模拟激波．     

Acceleration of interplanetary pick-up ions and anomalous cosmic rays

It may not be doubted anymore that anomalous cosmic rays (ACRs) are produced in the heliosphere from interplanetary pick-up ions through their acceleration at the solar wind termination shock. However, there is no general agreement in the community of heliospheric researchers concerning the mechanism of injection of the pick-up ions into the shock acceleration. We discuss here three possible ways for pick-up ions to be involved into the acceleration process at the termination shock: (1) preacceleration of pick-up ions in the whole region from the Sun up to the termination shock by solar wind turbulences and interplanetary shock waves, (2) local preacceleration of pick-up ions in a vicinity of the termination shock by shock surfing, and (3) formation of high-velocity tails in pick-up ion spectra consisting of secondary pick-up ions which are produced in the supersonic solar wind due to ionization of energetic neutral atoms entering from the inner heliosheath.     

Using gamma-ray burst prompt emission to probe relativistic shock acceleration

It is widely accepted that the prompt transient signal in the 10 keV–10 GeV band from gamma-ray bursts (GRBs) arises from multiple shocks internal to the ultra-relativistic expansion. The detailed understanding of the dissipation and accompanying acceleration at these shocks is a currently topical subject. This paper explores the relationship between GRB prompt emission spectra and the electron (or ion) acceleration properties at the relativistic shocks that pertain to GRB models. The focus is on the array of possible high-energy power-law indices in accelerated populations, highlighting how spectra above 1 MeV can probe the field obliquity in GRB internal shocks, and the character of hydromagnetic turbulence in their environs. It is emphasized that diffusive shock acceleration theory generates no canonical spectrum at relativistic MHD discontinuities. This diversity is commensurate with the significant range of spectral indices discerned in prompt burst emission. Such system diagnostics are now being enhanced by the broad-band spectral coverage of bursts by the Fermi Gamma-Ray Space Telescope; while the Gamma-Ray Burst Monitor (GBM) provides key diagnostics on the lower energy portions of the particle population, the focus here is on constraints in the non-thermal, power-law regime of the particle distribution that are provided by the Large Area Telescope (LAT).     

一种气动式冲击响应谱试验系统的设计与分析

大多数航天器单机产品都要求进行冲击响应谱试验,试验量级普遍为1000g~2000g,甚至超过3000g。对于较大质量(如50 kg以上)产品高量级的冲击试验,振动台、传统的摆锤式或跌落式冲击试验台均很难满足相关要求。文章研究并设计了一套能够进行大质量受试产品高量级冲击响应谱试验的气动冲击试验系统。该系统利用压缩空气瞬间释放膨胀推动质量块加速撞击具有多阶固有频率的谐振板,通过谐振板被激起的响应模拟复杂的衰减正弦波。测试结果表明,系统空载时冲击谱量级达8000g,负载200 kg时可达5000g,时域曲线为振荡衰减波,持续时间小于10 ms。文章提出的气动式冲击响应谱试验系统设计方法可为此类冲击试验系统的设计提供参考和理论依据。     

一种修正的Osher通量在高阶WCNS中的特性

将一种基于多维修正的Osher通量运用于高阶加权紧致非线性格式(WCNS)中,该修正通量主要在垂直于激波面的界面上增加耗散,能够改善Osher通量的激波捕捉稳定性,同时对边界层和接触间断的分辨率影响非常小。对修正的Osher通量在高阶WCNS中的特性进行研究,通过数值模拟测试了基于Osher通量的WCNS的激波稳定性、热流预测精度、边界层模拟能力、激波边界层干扰模拟能力,并与Steger-Warming通量和Roe通量进行了对比。结果表明修正后的Osher通量比Harten修正的Roe通量具有更好的激波捕捉鲁棒性,而边界层、驻点热流值和激波边界层干扰的模拟则明显优于Steger-Warming通量。上述结果说明了基于修正的Osher通量的高阶WCNS具有较好的激波捕捉特性、热流预测精度和边界层计算能力。     

Prediction of shock-layer ultraviolet radiation for hypersonic vehicles in near space

A systemic and validated model was developed to predict ultraviolet spectra features from the shock layer of near-space hypersonic vehicles in the ‘‘solar blind" band region. Computational procedures were performed with 7-species thermal non-equilibrium fluid mechanics, finite rate chemistry, and radiation calculations. The thermal non-equilibrium flow field was calculated with a two-temperature model by the finite volume technique and verified against the bow-shock ultra-violet(BSUV) flight experiments. The absorption coefficient of the mixture gases was evaluated with a line-by-line method and validated through laboratory shock tube measurements. Using the line of sight(LOS) method, radiation was calculated from three BSUV flights at altitudes of 38,53.5 and 71 km. The investigation focused on the level and structure of ultraviolet spectra radiated from a NO band system in wavelengths of 200–400 nm. Results predicted by the current model show qualitative spatial agreement with the measured data. At a velocity of 3.5 km/s(about Mach11), the peak absolute intensity at an altitude of 38 km is two orders of magnitude higher than that at 53.5 km. Under the same flight conditions, the spectra structures have quite a similar distribution at different viewing angles. The present computational model performs well in the prediction of the ultraviolet spectra emitted from the shock layer and will contribute to the investigation and analysis of radiative features of hypersonic vehicles in near space.     

LENS风洞试验返回器模型气动热特性模拟

国家数值风洞高超声速流动模拟软件HyFLOW的研制对打破国外同类软件的技术壁垒具有重要意义。与国外DPLR软件进行了对比研究，同时系统介绍了HyFLOW软件求解器的数值方法、物理化学模型以及壁面催化特性计算模型等主要方法，采用典型算例对有限催化模型进行了数值验证，最后基于LENS风洞试验146 mm返回器标模外形开展了高超声速气动热特性数值模拟。研究结果表明，HyFLOW软件在高超声速热化学非平衡流动模拟与评估方面的气动力计算精度高，与国外同类软件DPLR相当，同时其壁面催化条件下的气动热计算精度可靠，可信度高。     

前后缘型线同时可控的乘波体设计

提出了一种前后缘型线同时可控的乘波体设计方法,在马赫数可控的外锥形曲面基准流场中,结合流线追踪技术和混合函数,实现了椭圆前缘转椭圆后缘的乘波体设计,并在设计点(Ma=6.0)和接力点(Ma=4.0)对其进行数值仿真研究。前后缘同时可控的乘波体在型面剧烈过渡处产生了较弱的激波,出口两侧存在高温高压区,后部对称面附近的激波形状由圆弧变为平直线且出口处流场基本均匀,非常有利于与进气道匹配设计。另外,该乘波体具有较高的容积率和预压缩效率,附面层修正后的容积率为0.24,设计点时乘波特性较好,接力点时前部完全乘波,具有较高的升阻比,有黏条件下设计点和接力点的升阻比分别为2.54和2.41。此外,与给定前缘的乘波体相比,其升力、阻力、俯仰力矩和出口增压比都有明显增加,但是升阻比和出口总压恢复系数有所降低,在设计点无黏升阻比由3.56降为3.00。以上研究表明,本文的设计方法可行且更加灵活,拓宽了乘波体的选择范围。